Africa's Pressure-Reducing, Control, Check and Safety Valves Market to Rise with CAGR of +1.3% by 2035 - News and Statistics - IndexBox

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.

IndexBox has just published a new report: Africa - Pressure-Reducing, Control, Check and Safety Valves - Market Analysis, Forecast, Size, Trends And Insights.

The demand for pressure-reducing, control, check, and safety valves in Africa is on the rise, driving market growth over the next decade. By 2035, the market is projected to see a significant increase in both volume and value, with expected CAGR of +1.3% and +3.0% respectively. This growth trend reflects a positive outlook for the industry in the coming years.

Driven by increasing demand for pressure-reducing, control, check and safety valves in Africa, the market is expected to continue an upward consumption trend over the next decade. Market performance is forecast to decelerate, expanding with an anticipated CAGR of +1.3% for the period from 2024 to 2035, which is projected to bring the market volume to 30M units by the end of 2035.

In value terms, the market is forecast to increase with an anticipated CAGR of +3.0% for the period from 2024 to 2035, which is projected to bring the market value to $875M (in nominal wholesale prices) by the end of 2035.

In 2024, approx. 26M units of pressure-reducing, control, check and safety valves were consumed in Africa; dropping by -50.3% compared with 2023 figures. In general, consumption, however, recorded a buoyant increase. Over the period under review, consumption hit record highs at 92M units in 2022; however, from 2023 to 2024, consumption remained at a lower figure.

The revenue of the pressure-reducing iron valve market in Africa reduced remarkably to $633M in 2024, shrinking by -31.4% against the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). Overall, consumption, however, showed strong growth. The level of consumption peaked at $1.3B in 2022; however, from 2023 to 2024, consumption stood at a somewhat lower figure.

The countries with the highest volumes of consumption in 2024 were Nigeria (8.9M units), South Africa (4.9M units) and Ghana (2.2M units), with a combined 60% share of total consumption.

From 2013 to 2024, the most notable rate of growth in terms of consumption, amongst the main consuming countries, was attained by Nigeria (with a CAGR of +15.9%), while consumption for the other leaders experienced more modest paces of growth.

In value terms, the largest pressure-reducing iron valve markets in Africa were Nigeria ($117M), South Africa ($107M) and Guinea ($95M), together accounting for 50% of the total market.

Among the main consuming countries, Nigeria, with a CAGR of +14.2%, saw the highest rates of growth with regard to market size over the period under review, while market for the other leaders experienced more modest paces of growth.

The countries with the highest levels of pressure-reducing iron valve per capita consumption in 2024 were Central African Republic (155 units per 1000 persons), Tunisia (112 units per 1000 persons) and Togo (89 units per 1000 persons).

From 2013 to 2024, the biggest increases were recorded for Nigeria (with a CAGR of +13.2%), while consumption for the other leaders experienced more modest paces of growth.

In 2024, production of pressure-reducing, control, check and safety valves increased by 1% to 11M units, rising for the eighth year in a row after two years of decline. The total production indicated strong growth from 2013 to 2024: its volume increased at an average annual rate of +5.9% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2024 figures, production increased by +81.2% against 2016 indices. The pace of growth was the most pronounced in 2020 when the production volume increased by 19%. Over the period under review, production hit record highs in 2024 and is expected to retain growth in the immediate term.

In value terms, pressure-reducing iron valve production amounted to $421M in 2024 estimated in export price. In general, production continues to indicate a strong increase. The growth pace was the most rapid in 2020 when the production volume increased by 30%. The level of production peaked in 2024 and is likely to see gradual growth in the immediate term.

The country with the largest volume of pressure-reducing iron valve production was South Africa (4.7M units), comprising approx. 41% of total volume. Moreover, pressure-reducing iron valve production in South Africa exceeded the figures recorded by the second-largest producer, Ghana (2.2M units), twofold. Guinea (1.1M units) ranked third in terms of total production with a 9.7% share.

In South Africa, pressure-reducing iron valve production increased at an average annual rate of +6.0% over the period from 2013-2024. The remaining producing countries recorded the following average annual rates of production growth: Ghana (+6.4% per year) and Guinea (+6.8% per year).

In 2024, the amount of pressure-reducing, control, check and safety valves imported in Africa shrank remarkably to 15M units, declining by -64.5% on the previous year's figure. Overall, imports, however, continue to indicate a remarkable increase. The most prominent rate of growth was recorded in 2020 when imports increased by 193% against the previous year. Over the period under review, imports attained the maximum at 82M units in 2022; however, from 2023 to 2024, imports remained at a lower figure.

In value terms, pressure-reducing iron valve imports declined to $203M in 2024. Over the period under review, imports, however, showed a slight expansion. The pace of growth appeared the most rapid in 2020 with an increase of 61% against the previous year. Over the period under review, imports hit record highs at $366M in 2022; however, from 2023 to 2024, imports stood at a somewhat lower figure.

Nigeria dominates imports structure, recording 8.9M units, which was approx. 58% of total imports in 2024. Algeria (920K units) took the second position in the ranking, followed by Egypt (792K units). All these countries together held near 11% share of total imports. The following importers - Kenya (664K units), Senegal (523K units), South Africa (349K units), Angola (307K units), Tunisia (295K units) and Zimbabwe (236K units) - together made up 16% of total imports.

From 2013 to 2024, average annual rates of growth with regard to pressure-reducing iron valve imports into Nigeria stood at +15.9%. At the same time, Senegal (+38.7%), Zimbabwe (+7.9%), Kenya (+6.3%), Algeria (+3.2%) and Egypt (+2.5%) displayed positive paces of growth. Moreover, Senegal emerged as the fastest-growing importer imported in Africa, with a CAGR of +38.7% from 2013-2024. Tunisia experienced a relatively flat trend pattern. By contrast, South Africa (-9.4%) and Angola (-12.8%) illustrated a downward trend over the same period. Nigeria (+39 p.p.) and Senegal (+3.3 p.p.) significantly strengthened its position in terms of the total imports, while Egypt, South Africa and Angola saw its share reduced by -1.7%, -9.4% and -13.7% from 2013 to 2024, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, the largest pressure-reducing iron valve importing markets in Africa were Nigeria ($56M), Egypt ($48M) and South Africa ($21M), together accounting for 62% of total imports. Algeria, Tunisia, Kenya, Angola, Zimbabwe and Senegal lagged somewhat behind, together accounting for a further 19%.

In terms of the main importing countries, Senegal, with a CAGR of +27.1%, recorded the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.

In 2024, the import price in Africa amounted to $13 per unit, jumping by 143% against the previous year. Overall, the import price, however, showed a pronounced decrease. The level of import peaked at $23 per unit in 2016; however, from 2017 to 2024, import prices failed to regain momentum.

There were significant differences in the average prices amongst the major importing countries. In 2024, amid the top importers, the country with the highest price was South Africa ($61 per unit), while Senegal ($4.2 per unit) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by South Africa (+8.5%), while the other leaders experienced more modest paces of growth.

After two years of growth, shipments abroad of pressure-reducing, control, check and safety valves decreased by -79.3% to 211K units in 2024. In general, exports continue to indicate a deep contraction. The growth pace was the most rapid in 2023 when exports increased by 36% against the previous year. As a result, the exports attained the peak of 1M units, and then fell markedly in the following year.

In value terms, pressure-reducing iron valve exports reduced remarkably to $12M in 2024. Overall, exports continue to indicate a noticeable decline. The most prominent rate of growth was recorded in 2020 with an increase of 53% against the previous year. Over the period under review, the exports reached the maximum at $18M in 2013; however, from 2014 to 2024, the exports stood at a somewhat lower figure.

South Africa prevails in exports structure, reaching 158K units, which was approx. 75% of total exports in 2024. Tunisia (8.6K units), Angola (5.4K units), Egypt (4.3K units), Nigeria (4.1K units), Libya (4K units), Mozambique (3.6K units) and Zambia (3.4K units) held a minor share of total exports.

Exports from South Africa decreased at an average annual rate of -13.7% from 2013 to 2024. At the same time, Egypt (+82.9%), Nigeria (+11.9%), Mozambique (+9.7%) and Zambia (+3.8%) displayed positive paces of growth. Moreover, Egypt emerged as the fastest-growing exporter exported in Africa, with a CAGR of +82.9% from 2013-2024. By contrast, Angola (-5.9%), Libya (-6.5%) and Tunisia (-20.3%) illustrated a downward trend over the same period. From 2013 to 2024, the share of Angola, Egypt, Nigeria and Mozambique increased by +2.5, +2, +1.8 and +1.6 percentage points, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, South Africa ($9.7M) remains the largest pressure-reducing iron valve supplier in Africa, comprising 82% of total exports. The second position in the ranking was taken by Nigeria ($601K), with a 5.1% share of total exports. It was followed by Tunisia, with a 2.5% share.

From 2013 to 2024, the average annual growth rate of value in South Africa totaled -3.7%. In the other countries, the average annual rates were as follows: Nigeria (+24.6% per year) and Tunisia (-15.5% per year).

The export price in Africa stood at $56 per unit in 2024, with an increase of 297% against the previous year. In general, the export price continues to indicate strong growth. As a result, the export price attained the peak level and is likely to continue growth in the immediate term.

There were significant differences in the average prices amongst the major exporting countries. In 2024, amid the top suppliers, the country with the highest price was Nigeria ($148 per unit), while Angola ($13 per unit) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by Egypt (+49.2%), while the other leaders experienced more modest paces of growth.

Source: IndexBox Market Intelligence Platform

This report provides an in-depth analysis of the pressure-reducing iron valve market in Africa. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

Making Data-Driven Decisions to Grow Your Business

A Quick Overview of Market Performance

Understanding the Current State of The Market and Its Prospects

Finding New Products to Diversify Your Business

Choosing the Best Countries to Establish Your Sustainable Supply Chain

Choosing the Best Countries to Boost Your Exports

The Latest Trends and Insights into The Industry

The Largest Importers on The Market and How They Succeed

The Largest Exporters on The Market and How They Succeed

The Largest Producers on The Market and Their Profiles

The Largest Markets And Their Profiles